Steps to Re-Flash Your HOOBS Box

1. Download and Install the Raspberry Pi Imager

– Download the software from here and install it on your computer.

2. Download the HOOBS Box Re-Flash Image

– Download the HOOBS Box Re-Flash image file from this link.

3. Open Raspberry Pi Imager

– Launch the Raspberry Pi Imager application on your computer.

4. Configure the Flashing Process

– Click CHOOSE DEVICE and select no filtering to ensure all devices are visible.

– Click CHOOSE OS, scroll to the bottom, select Custom, and then choose the downloaded HOOBS Box Re Flash image file.

– Click CHOOSE STORAGE and select your microSD card.

– Click NEXT.

5. Follow the Prompts

– When prompted to save custom settings, click No.

– Confirm erasing everything on the card by clicking Yes.

6. Complete the Flashing Process

Once the flashing process is complete, remove the microSD card from your computer.

7. Reinsert and Power Up Your Device

– Insert the microSD card back into your HOOBS Box.

– Connect an Ethernet cable to the device, wait 10 seconds, and then plug in the power cable.

– Allow 2-3 minutes for the device to load completely.

Still need Help?

Check out our Knowledgebase for additional assistance.

Didn’t find the answer in the Knowledgebase? Contact our Customer Service.